Select recommendations from experts who use this product

Excellent quality

Works great, excellent quality, nice clean option to mounting optics.

I have this mount on three of my AR rifles. A 5.56, 22 Nosler, and a 308 Win. The quick release system is great for being able to move from a 3x15 Power scope for long range target to a lighter 1x5 Power scope that is easier to carry all day while hunting in heavy brush. After switching from one scope to another I can normally re-zero in two shots. Once locked down these mounts stay solid. I can easily mount my green laser light on the front ring and it lines up perfectly with the scope for night shooting. I have this mount on three of my rifles because they work.

Burris is a great company they not only make great offset scope mount however they make an incredible Hiline of Tactical scopes as well as rifle hunting scopes. There quality in Optics and the Coatings they use are amazing. Their new scope that does range finding and helps you adjust for windage is incredible.

Solid mount for great price!

Have used on multiple platforms in multiple calibers including 50 Beowulf and have never had an issue!

Very good

This is the 3rd mount I have bought from them, 2 are QD and 1 is not. These are very well built and true once mounted. I switch from a scope in this mount to a NV scope for hogs on an AR 10 platform and have had no issues with any of these mounts

Rock solid mount.

Only one change to make…

Got this to mount a Vortex Strike Eagle 5-25x56 on my AR10 6.5 creedmoore it needed a 34mm tube mount and this was not only less than the Vortex mount but had picatinny top mounts (also came w/smooth top if you rather use those. Fit the scope and rifle like a glove. Only change I would make would be a QD to the rail. Mounts the x56 objective very close to the rail (rifle is a “high” rail), nice because puts the Reticle closer to the barrel

Great Product!

The easy to remove mount makes it very convenient in the field.

Easy to mount, hold zero very well. Used this on a rifle I took to a long distance shooting class.

Looks great works great

You get a lot in this product without spending a lot, works very well

Great product and great price

Light and sturdy I have it on my duty rifles now

Easy to mount

It was easy to mount and fits very well. I recommend it.

Worth It

I have this mounted on a RPR 6.5 CM using a Viper HS LR 6-24x50 from Vortex. It mounts perfectly and has no slippage or any issues with the mounting itself. Easy to install. Recommend.

Great scope mount

Very high quality

Very Nice Rugged Scope Mount

It's Solid! The other reviews and videos helped sell me on it. It's great build quality and very solid. Overall I think it has gone great so far on my Noreen BM36 300 Win Mag AR.

Nice quick disconnect

Mount is made strong, sits nice at nice height over weapon and like the mounting options for secondary sight. I have scope for distance and red dot for CQB

Fantastic mounting option!

This mount is rock solid. This easily attaches, and sets the scope at the correct eye distance. I love the fact that there is a quick-attach, and also rails at the top. This allows a close-range optic to be mounted, as needed. For those that prefer smooth rings, they are also included in the box. Easy to use for all levels and great quality!

Works perfect

quality build

Great optic mount for offset needs

Perfect fit

Fits well with the Vortex 4-16x. Mounted on the Ruger American .308.

Great option

I purchased to replace the same product but in a different size. I love the security it offers my scopes and I know I don’t have to worry about the scope walking around on me. In my opinion this is the best ring setup for a heavy AR setup.

Works as Described

This is a good product!

Solid Mount

The importance of a good scope mount is often over looked. I've been using this on a 6.5 Creedmoor for over a year now and it's holding zero perfectly. The 20moa rail made it easy to reach out for a one mile target, wouldn't have been possible without it.

Perfect Fit - Vortex Strike Eagle 3-18x44 FFP

Purchased this mount for an AR-10 build chambered in .308 - holds the 34mm Vortex Strike Eagle 3-18x44 perfectly. Love the fact that it is light but sturdy and the upper ring can be swapped out with preference. Will be using Burris again in the future.

Quality QD mount for AR 10

I bought this mount for my AR10. I put a pulsar thermion in it and it returns to zero every time. I switch my scopes around almost everyday to help with our farms hog problem. It is solid, easy to use, and exactly what you need. Little on the heavy side but handles the 308 recoil like a champ.

Really sturdy mount

This is the first scope mount I've used in this style. The top portion has picatinny rail but it comes with some smooth tops in the package if you don't need the rail. Very sturdy build.

Great product

Have used them for years really not possible to buy as good for the money. Put this one on 308 700 for riggings steel at 700 yards worked great.

Excellent hardware

High quality and perfect for quick removal

1st scope mount

I won’t be testing it out for a few months but so far I am impressed by the quality.

Ease of use and rigid mount

Worth the Price

The mount worked great. It is solid and worth the price. It is easy to mount and does not move.

Awesome mount for the money

These are inexpensive and built well. I run them on my Ar platform rifles! All holding xtrii s

Love the six bolt per tube clamp.

I tired this cantilever scope mount after removing the high rings that I had previously had. This cantilever felt more conformable on the glass than my previous mounts. I strongly recommend a screwdriver type torque wrench for this product because of the small values that is being called for. I would say this item is good for entry level to expert level shooters.

QD on an AR

I like the way this mounts on top of my AR. I find is compliments the Vortex Strike Eagle very nicely.

Solid Mount

It’s rock solid

It preforms well holds zero perfectly

Great QD Mount

I have run several 10k biathlons with this mount and it has never failed me. Holds solid. Easy to detach for switching to a thermal and holds zero well. This will work well for any application and is priced right. Do not look any further for a solid do it all AR Picatinny mount. Good for a first build AR or advanced setup. After 3k rounds, mine is still holding up strong. Another quality Burris product.

stays aligned light

my fifth one

AR PEPER QD Mount

Works great with the Burris RT-6 LPVO. Holds tight to both the optic and the weapon. Build quality seems good and the QD levers make removal of the optic easy. The height at which it holds the scope is spot on for eye relief. It comes with both picatinny and smooth upper portions of the scope mounts. If you are in the market for a LPVO mount, I would highly recommend. It does what it is intended to at a good price.

Great optic mount

I use this mount on multiple ar15 setups from 5.56 to .458 socom. This is a really solid rugged mount. No worries about stripping the mounting screws like some of the cheaper options.

Works good, easy to set up and mount.

Rock Solid

Great mount. Rock solid. Scope hasn't moved and returns to zero if I take it off and on.

Quality brand.

Great addition to AR15

I purchased a LPVO for my AR and needed a offset mount to give the best positioning of the scope. This mount did just fine. It also comes with a pic rail on the top half of the rings if you desire to mount a red dot or light. I don't really need that for this application but it is a nice touch.

A Product I Own

Great AR Mount. Bought one when they came out.

Quick to mount QUick to move

precision QD mount and Rings allows me to move my Athlon 1 x 8 x 24 from CZ EVO 3 Scorpion to Ruger 10/22 Take down to Smith and Wesson M&P 15 OR simply adjust the elevation and it's good to go

Great option

I like the quality and the placement of the optic. Using with a Vortex Strike Eagle. Highly recommend.

This mount is a pig, but I have no complaints about the repeatability or the QR levers. It was exactly what I wanted, if an ounce or two heavier. That's what you give up at this price

Heavy duty mount

This is a no BS heavy duty mount. I like the multiple top ring screws for each "ring" and I also like the option for a picatinny rail on top of one or both rings. Only negative is the weight. It's heavy when compared to other 30mm picatinny rail mounts. However I'd still recommend it.

Great Mount For The Price

Put this mount on 3 rifles. Solid, well-made mount. Solid lockup, versatile with smooth and rail rings. Not super lightweight, but strong and reliable, easy on-off, retains zero well. Great product, overall.

Getting it done for a reasonable price

Solid mount with the added benefit of having pic rail segments available so that the space on your upper isn't completely sacrificed for your scope. It seems rugged and dependable thus far. All of this, and it's a fraction of the price of many mounts. The one feature that is absent that may sway someone away from this mount is a fast release mechanism. This would be important if switching your optic to multiple firearms. However, for the price of some mounts with this feature you could buy this Burris mount and an inexpensive optic. This product is an excellent option for a beginner, intermediate shooter, or even the value minded expert in my opinion.

Good build quality and return to zero when removed and replaced, only ding would be getting away from the 1913 rail and to an actual red dot foot print mount like an RMR

Still holding on

Been mounted on an AR10 with no issues for 5ish years. No problems at all.

Incredible function for the price

Competitors are twice the price and the same weight. This keeps a great zero. I pop it off and on constantly to go down to irons and different set ups. It makes me enjoy my variable optics even more. I hate not being able to change and adapt weapon setups. A great warranty is a relief. I wish more companies offered a warranty you can trust so you can test your limits. I hate not using something because I’m worried I’ll break it.

Excellent mounts. Hold zero when moving thermal to different rifle’s. Can’t beat the price compared to the competition.

This mount has been rock solid. I have installed on a built AR 10 6.5 creed. I have no issues with mount coming loose.

Great mount

Great mount for AR platform especially for LVPO especially for the price

Great product

Got for a Burris veracity on a 6.5 creedmor rifle and had performed great

Solid mount for the scope

I have had this mount on my AR for three years now and the scope hasn’t budged a bit. It was easy to install on the rail with the QD mount and it holds very steady. I liked the single piece mount too because it made lining up the scope a breeze. The mount would be good for people looking to switch optics for different types of shooting.